- Home
- DOMINATOR
DOMINATOR
OVERVIEW OF DOMINATOR
From packaged fire pump sets to complete fire protection solutions, DOMINATOR combines engineered performance, regulatory compliance, and dependable operation to help safeguard buildings and assets.
Products
technical data
Industrial Water Pressure Booster Systems
Overview
All Purpose Pumps’ HYDRA™ Industrial Water Pressure Booster Systems are engineered to provide reliable, constant water pressure to mechanical cooling and process equipment. Optimised for flows from 1 to 150+ L/s, they ensure consistent performance across varying demand conditions. Each system is fully custom-designed to meet project-specific requirements and principal specifications. Advanced configurations, including dual redundancy (N+1), deliver uninterrupted operation and enhanced reliability for mission-critical applications.
HYDRA™ Pressure Booster Systems are engineered to handle a full range of flow conditions, including low-flow applications, through the use of low-flow jacking pumps. This approach maintains optimal hydraulic efficiency across all operating points, reduces mechanical stress on pump components, and extends the operational lifespan of the system while ensuring reliable, high-performance operation.
Component Overview
Base
- Common galvanised base plate and controller stand, capable of vibration isolation mount installation.
- Baseplate and lifting point designed to meet AS4100:1998 and AS1170.1:2002.
Pumps
- Vertical multistage pump with standard IEC motors and M.I.P (Maintenance in Place) capabilities.
- Cartridge mechanical shaft seal.
- Vibration isolation rubber mounts.
- AS4020:2018 potable water compliant.
Manifold
- Stainless steel suction and discharge manifolds.
- Pump isolation and non-return valves.
- 20mm test and drain valve.
- Stainless steel liquid filled pressure gauge.
- Pressure accumulator tank.
- Pressure Sensing Transducer (VSD).
Controller
- Incorporating colour touch screen & panel mounted VSD with communication interface.
- Manufactured in accordance with the relevant standards: AS3000:2007, AS1939:1990 and AS3439.1:2002.
- Constant Pressure VSD’s (Variable Speed Drives) including capability for Ultra-Low Harmonics.
- High level interface for system monitoring and data logging.
- BACnet control (if required).
- IP 44 control panel enclosure as standard, with opportunity to increase IP rating upon request.
– AS3000:2018 Electrical Wiring Rules.
– AS1939:1990 Degrees of protection provided by enclosures.
– AS3439.1:2002 Low voltage switchgear and control gear assemblies
Features
- High Flow Vertical Multistage Pumps.
- Low Flow Vertical Multistage Pump.
- Reliable and proven control logic.
- Variable Speed Drive Controller with LED Screen.
- Fully Fabricated Stainless Steel Manifold and Valves.
- Pressure Tanks.
- Common Steel Base for easy transport and installation.
Inclusions
- Delivery to Site – optional crane truck.
- Factory Acceptance Testing (F.A.T) at our state-of-the-art facility.
- Onsite Commissioning.
- 24/7 technical support.
Technical Data
Applies to N+1 arrangements
| Number of pumps | 1-6 |
| Flow range | 1L/s – 150+L/s |
| Maximum head | 2000 kPa |
| Liquid temperature | 0°C to +50°C |
| Ambient temperature | 0°C to +30°C |
Recirculation Filtration System
Overview
All Purpose Pumps HYDRA™ Industrial Water Recirculation Filtration Systems are engineered to provide continuous circulation and high-efficiency filtration of industrial water within storage tank networks. These systems ensure water quality is maintained, protecting downstream equipment and supporting reliable operation of mechanical cooling or process systems.
Each HYDRA™ system is fully custom-designed to meet specific project requirements and principal specifications. Advanced configurations including dual redundancy (N+1) and integrated skid-mounted solutions, combined with Water Pressure Booster Systems, are available to deliver enhanced reliability and seamless integration into complex water infrastructure.
Component Overview
Base
- Common galvanised base plate and controller stand.
- Baseplate and lifting point designed to meet AS4100:1998 and AS1170.1:2002.
Pumps
- Single stage end suction pump or vertical multistage pump with standard IEC motors and M.I.P (Maintenance in Place) capabilities.
- Cartridge mechanical shaft seal.
- Vibration isolation rubber mounts.
- AS4020:2018 potable water compliant.
Manifold
- Stainless steel or PVC suction and discharge manifolds.
- Pump isolation and non-return valves.
- 20mm test and drain valve.
- Stainless steel liquid filled pressure gauge.
- Pressure accumulator tank.
- Pressure Sensing Transducer (VSD).
- Flow control valves.
Controller
- Manufactured in accordance with the relevant standards: AS3000:2007, AS1939:1990 and AS3439.1:2002.
- Constant Pressure VSD’s (Variable Speed Drives) including capability for ultra-low harmonics ULH.
- High level interface for system monitoring and data logging.
- BACnet control (if required).
Features
- Vertical or Horizontal Multistage Pumps.
- Reliable and proven control logic.
- Variable Speed Drive Controller with LED Screen.
- Fabricated Stainless Steel Pipework and Valves.
- Pressure Tanks.
- Common Steel Base for easy transport and installation.
Inclusions
- Delivery to Site – optional crane truck.
- Factory Acceptance Testing (F.A.T) at our state-of-the-art facility.
- Onsite Commissioning.
- 24/7 technical support.
Technical Data
Applies to N+1 arrangements
| Number of pumps | 1-2 Pumps |
| Flow range | 1L/s – 120L/s |
| Maximum head | 2000 kPa |
| Liquid temperature | 0°C to +50°C |
| Ambient temperature | 0°C to +30°C |
Chlorine Dosing & Monitoring System
Overview
All Purpose Pumps’ HYDRA™ Chlorine Dosing & Monitoring Systems provide a premium, engineered solution for maintaining safe and compliant water quality in both potable and industrial storage applications. By accurately controlling free chlorine levels through continuous circulation, precise chemical injection and intelligent automation, HYDRA™ ensures disinfected, stable water with minimal manual input—ideal for commercial, multi-residential and industrial environments.
Building on this capability, HYDRA™ Monitoring Dosing Systems are purpose-designed for mission-critical sites such as data centres. These systems pair active chlorine dosing with real-time monitoring of key water parameters to ensure stored and circulating water consistently meets strict operational standards. Together, HYDRA™ Chlorine Dosing and Monitoring Systems provide a dependable, intelligent and fully engineered treatment solution, safeguarding water quality wherever reliability is essential.
Component Overview
Controls
- HMI colour touch screen display coupled with a complete dashboard of indicator lights.
- Permanent data storage with system log.
- USB download of logged data.
- System run time clock.
- Expandable for monitoring and control of additional parameters, as required.
Pumps
- Slower operating speeds enhance long-term reliability and durability.
- Stainless steel construction.
Future Expansion
- Controls incorporate the logic and allow space for additional channels.
- The manifold is configured with ports to support additional sensors.
Redundancy and Alerts
- Early chemical storage low level warning.
- Low flow protection.
- ORP monitoring to override.
- Integrated run-time monitoring provides overdose protection.
Remote Connectivity
- Modbus TCP/IP.
- Voltage-free common fault for up to 10 scenarios
Features
- Large LCD Full Colour Touchscreen Display.
- Large capacity storage for logging.
- High-performance microprocessor & operating system.
Technical Data
| Tank volume range* | 2m³ to +287m³* |
| Chlorine storage* | 1L/s – 120L/s* |
| Sample line discharge* | 8mm* |
| Options* | pH Monitoring Salinity Monitoring* |
| BMS communication* | Common voltage free output for up to 10 events Modbus TCP/IP* |
Industrial Water Storage Tanks
Overview
All Purpose Pumps’ HYDRA™ Industrial Water Storage Tanks are engineered for data centre, healthcare, and commercial applications, delivering durable and reliable water storage solutions. Manufactured in compliance with Australian Standards, HYDRA™ tanks are widely specified by leading industry specialists for their proven quality and performance.
Each tank is fully engineered to exceed structural, seismic, and wind-loading requirements, ensuring safe, long-term operation in demanding environments. Every HYDRA™ system is custom-designed to meet project-specific requirements, with the All Purpose Pumps experienced engineering team, collaborating closely with clients throughout design, coordination, and integration with existing infrastructure. Our professionals provide complete installation and commissioning services, ensuring tanks are installed to the highest safety standards and deliver a seamless, reliable, fully engineered water storage solution.
System Overview
Comprising
- Steel Panel Tank (bolted) with internal PVC Liner suitable for use with potable water, available in the following material:
– Galvanised Steel.
– 304 Stainless Steel.
– 316 Stainless Steel.
– High Grade Galvanised GR450 & LDX 2101 Stainless Steel for complex & large storage. - Manufactured in accordance with relevant Australian Standards.
- Sheet metal roofing with anti-vermin protection.
- 750 x 750mm inspection access in top of tank.
- 600 x 600mm manhole access in side of tank at low level.
- External galvanised steel access ladder constructed in accordance with AS1657:2018.
- External ladder fitted with lockable guard.
- Mechanical Tank level indicator with signage.
- Inlet, overflow connection & outlet connection with anti-vortex plate.
- Drain outlet.
Optional
- Digital tank level indicator.
- Stair access.
- Reg 126 packages.
- Roof access – central walkway & platforms to connect to adjoining tanks or structure.
- Stair access – custom solution to fit any installation.
- Insulated tank options for Thermal Mass Storage.
- Customised lining solutions for Bentonite, Corrosion Inhibitors & other chemical resistance.
- Liner solutions for insitu tanks.
Inclusions
- Each tank is customised to suit individual site installations.
- Expert Engineering & Project Management assistance – Plinth construction, egress, pipework connections, installation program & coordination, delivery logistics & compliance.
- Construction on site by APP Specialist Tank Installation Team.
- General Arrangement Design drawings provided in PDF format for the above equipment after time of order.
- BIM models.
- Suitable for use with Chlorine Dosing systems.
Technical Data
| Tank volume range | 2m³ to +287m³ |
| Chlorine storage | 1L/s – 120L/s |
| Sample line discharge | 8mm |
| Options | pH Monitoring Salinity Monitoring |
| BMS communication | Common voltage free output for up to 10 events Modbus TCP/IP |
Automatic Screen Filtration System
Overview
Our HYDRA™ Automatic Screen Filtration System is engineered to safeguard mission-critical cooling infrastructure by delivering clean, reliable domestic water to industrial Water Storage Tanks. Designed around high-performance automatic backwash filters, the system provides continuous filtration without interrupting downstream flow; ensuring stable water quality for chillers, heat exchangers and other essential cooling equipment.
The system is available with single or dual-stage filtration and includes a complete manifold with an integrated bypass. Fully automated, differential-pressure-triggered backwashing ensures consistent performance, even with variable authority water conditions. Each filter operates independently and features its own built-in bypass and dedicated drain connection, allowing for easy maintenance and long service life.
Engineered for dependability, automation, and compliance, this filtration system provides confidence that your cooling water supply remains clean, stable, and ready to support continuous uptime.
System Overview
Base
- Common galvanised base plate and controller stand.
Controls
- BMS connections for operation, fault, and backwash status available.
- Manufactured in accordance with the relevant standards: AS3000:2007, AS1939:1990 and AS3439.1:2002.
Manifold
- Stainless steel suction and discharge manifolds.
- Manual bypass & isolation.
- 20mm test and drain valve.
- Stainless steel liquid filled pressure gauges on suction & discharge manifolds.
Filters
- Automatic backwash via differential pressure and timer control.
- Efficient screen cleaning ratio of 1:1 using point rotation principle.
- No interruption to water flow during screen cleaning.
- AS 4020:2018 potable water compliant.
- Stainless steel screen that is silver-coated to inhibit bacterial growth
Features
- Eliminates suspended particles that lead to pitting, corrosion, and blockages.
- Fully automatic screen cleaning by pressure differential control.
- Uninterrupted water flow during screen cleaning.
Inclusions
- Delivery to site – optional crane truck.
- Factory Acceptance Testing (F.A.T) at our state-of-the-art facility.
- Onsite Commissioning.
- 24/7 technical support.
Technical Data
Applies to N+1 arrangements
| Arrangement options* | N (duty or duty/duty) N+1 (duty/standby)* |
| Filtration series* | 1-2 Per N System* |
| Filtration micron* | 30µm to 500µm* |
| Flow range* | 1L/s – +110L/s* |
| Maximum head* | 1000 kPa* |
| Liquid temperature* | 0°C to +50°C* |
| Ambient temperature* | 0°C to +30°C* |
get in touch
thanks for your submission!
We’ve received your enquiry and a member of our team will be in touch shortly. Whether you need product advice, technical support, servicing or a project quotation, we’re here to help and look forward to assisting you.